How to Repair or Fix a Leaking Mitsubishi Aircon?

Mitsubishi aircon

1. Remove the AC from the wall or window

To solve the problem of a Mitsubishi Aircon leaking water, the first thing you need to do is take it out of the wall or window. This will stop the water from leaking or dripping from the unit right away.

As most AC units are naturally heavy, it’s always a good idea to ask for assistance from other members of the house or an Aircon technician. Make sure to move AC gently to avoid any slip-ups. For additional caution, refer to the Aircon manual for best handling tips.

Once you successfully removed the unit, place it on a dry, clean and flat surface. Avoid placing it on wet and dirty surfaces such as soil or grass to prevent additional Aircon problems.

2. Unscrew and open the unit

Get a screwdriver and gently open the unit by remove the bolts and screw. Make sure to keep these in a secure container to prevent misplaced detachable later on.

Because AC varies by size, type, and design, there is no standard way of unscrewing these units. For the best guidance, check your AC manual and look at disassembling instructions.

3. Aircon Repair the leaking problem

Once it has been uncovered, you should see a plastic tray at the bottom of the AC unit. that tray or pan is responsible for collecting water during the AC cooling process. If you noticed any dust, dirt, or mold formations, then it’s just all the most reason for you to clean the surface right away.

To eliminate these particles, just interface a hose or any water source to the plate and let a constant flow of watercourse across the whole surface. You can also add a few drops of dishwashing gentle detergent soap to disinfect and further break down the stains.

For other causes such as refrigerant leaks or broken overflow pans, contact a professional AC technician or Aircon servicing company. These are not recommended for DIY AC repairs as they usually involve more stringent repair procedures.

4. Dry the AC unit and screw everything back together

After AC cleaning and draining the tray free of dirt and cloggings, it’s time to assemble everything back together. But before doing this, you want to make sure that every part and surface has all dried up of water. Once you see no more sign of water in the AC unit, screw it back together. Simply repeat the similar process in reverse. If you want to be extra sure, you can always readed the manual for reassembling instructions.

Reinstall the AC in the window or the wall to put it up and running once again. Make sure that everything is tight, secure, and align correctly to avoid running into a new problem down the line.

5. Turn on the AC unit and observe for any continued leakages or problems

Once the unit has started running again, be on the lookout for any slightest hint of water leakages or drippage. If you find that the problem has stopped altogether, You have successfully repaired your leaking AC.

Additionally, you would also need to pay attention to any noise such as whirring, squealing or any unusual sound that can indicate something’s wrong with the way the unit was reassembled or reinstalled.

If the problem still continues to persist or if you run into a new complication with the unit, contact an Aircon servicing company or technician right away.

Book  an Appointment Call or What’s app: +65 90050975

Recent Bookings